LADY SUSAN

42' Carver 1989

$99,000

INTERESTED IN THIS YACHT?

To Learn More Contact

Ron Housman

617.549.4123

SEND RON A MESSAGE

Full Name *
Email *
Phone Number *
Comments

SPECIFICATIONS

SHARE ON

42' Carver 1989 Lady Susan

BROKER DESCRIPTION

EXCEPTIONAL CONDITION. "Lady Susan" is a 1989 Forty two foot Carver in very good to near excellent condition. Her interior and engine room are in exceptional condition. The vessels exterior is also in very good condition and it is apparent that she has been well maintained by her previous owner. Lady Susan is powered by the venerable Caterpillar 3208 engines and have original 1300 hours. One will be hard pressed to find a similar vessel on the market in this condition with such low hours.

SPECIFICATIONS

Builder:

Carver

Model:

Aft Cabin 42

Cruise Speed:

12 KTS

Max Speed:

18 KTS

Range NMI:

260

Beam:

15' 0"

Engine Details:

Caterpillar 3208 TA

Engine 1:

1989 1270.00 HP

Engine 2:

1989 1270.00 HP

Engine Fuel:

Inboard Diesel

Fuel Capacity:

400 GAL

Water Capacity:

170 GAL

DETAILS

EXCEPTIONAL CONDITION. "Lady Susan" is a 1989 Forty two foot Carver in very good to near excellent condition. Her interior and engine room are in exceptional condition. The vessels exterior is also in very good condition and it is apparent that she has been well maintained by her previous owner. Lady Susan is powered by the venerable Caterpillar 3208 engines and have original 1300 hours. One will be hard pressed to find a similar vessel on the market in this condition with such low hours. 

Entering the aft cockpit area via the port or starboard entry from the exterior walkway, one finds a spacious entertaining area complete with bar area and refrigerator. Walk up a companionway to the spacious flybridge of down a separate companionway to the salon area. In the salon a leather "L" shaped sofa is to starboard with a coffee table, storage and electrical panel to port. Forward to port is an interior helm for vessel operation in inclement weather. Forward of the salon a dinette is lower and to port and a galley down to starboard. Moving forward, starboard side are two spacious storage compartments as a pantry, an entrance to the forward head to starboard and a doorway for entering the "V" berth. The berth is angle across the port side and storage is to starboard. Moving aft from the salon, one finds a large master aft cabin with a queen size berth, an abundance of storage and closet space and an en-suite head complete with shower.

Entry to the engine room is through fold up stairs in the companionway between the galley and the salon. A Kohler generator is located immediately to port in the entrance to the engine room. The engine room has an abundance of space and ample headroom. The engines are exceedingly clean and well maintained, the engine mounts are in very good condition. The fuel tanks are of stainless steel construction.

The flybridge has Eisenglass in near new condition, no clouding or scratches. The canvas is in excellent condition. The bridge allows for easy visual 360 degrees. The electronics package of this vessel are the original electronics and while functional, the vessel would benefit from an upgraded electronics package. The flybridge is exceptionally clean in in very good condition.

The Carver 42 Aft Cabin features two large private staterooms. The owner's stateroom (aft) has a queen berth, two full hanging lockers ad private head compartment with shower. Forward, there is a roomy guest stateroom with the optional V berth plan. The salon is equipped with a wet bar, entertainment center, "L" shaped sofa and breakfast bar. Topside, the command bridge provides seating for seven arranged fore and aft of the walk around command console. The 42 Aft Cabin is the perfect yacht for extended cruising.

Welded Stainless Steel bow, aft deck and bridge rails, stainless steel deck hardware including three 12" bow cleats, four spring line cleats and two 10" aft deck mooring bits. Electronics Arch

Command bridge includes Eisenglass enclousure, venuri windshield, bridge seating for seven, electronics locker and storage.

Aft Deck fiberglass weather protector

Fully weather sealed deck hatches

NMMA Approved navigation lights

Anti-skid decks

Fiberglass swim platform with ladder

Fiberglass bow pulpit




Pressurized 170 gal hot/cold water system

20 gallon water heater

3 burner stove

microwave oven

Refrigerator/Freezer

Double round stainless steel sinks in Galley

16+ foot usable counter space in Galley

Forced air exhaust ventilation

Vanities with stainless steel sinks, pressure water, mirrors and storage in heads

Fiberglass shower stalls with bi-fold doors

Raritan electric heads with dual 40 gallon waste tanks

Dual dockside 110v - 50 A

40 Amp battery charging system

Hour meter for generator

50 Amp dockside adaptors

12 Kw Koehler Generator

Fresh water cooling for genset

Aft deck hardtop

Aluminum electronics arch with storage pod

Electric windlass

Fire Extinguisher

Fender racks

Bridge and Aft deck carpeting

cockpit pressure washdown

The Carver 42 hull planes easily and exhibits exceptional tracking ability. The fine entry, three quarter length keel, innovative shape of the running bottom and location of the center of gravity all contribute to the superior performance of this vessel. The planning surface of the hull has parallel buttocks and slopes up ad it runs aft. The wide chines are parallel to the waterline, causing the chines to widen significantly as they run aft. the chines measure two feet wide at the transom, providing extra initial stability. To eliminate bow spray a second was designed into the hull to deflect the bow wave out.




Hull construction begins with a fully cured gel coat of 15 mil thickness. Hand layup method of construction guarantees the proper fiberglass to resin ration, assuring consistent laminate strength throughout. The hull is made up of several 1 1/2 random strand mat and 24 oz woven roving fiberglass. Generous overlap of the layers in the keel and chines increase hull strength, impact resistance and overall integrity. The stringer system is 100percent fiberglass re-enforced with aluminum in the engine room. The stringer system is a one piece grid network bonded to the solid fiberglass hull bottom. The hull sides have balsa core above the waterline, providing stiffness resulting in a structure that is incredibly strong with minimum weight.

All of our listings are available for co-brokerage on a 50-50 commission split agreement when the selling broker shows the listing and attends the survey. If the selling broker requires a courtesy showing and we are available to conduct a courtesy showing on our listing, the co-brokerage commission split is 60% listing commission and 40% selling commission. If the selling broker does not attend the survey, the co-brokerage commission split is 70% listing commission and 30% selling commission.



The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. This listing is a courtesy of a member of the International Yacht Brokers Association and may be centrally listed with another broker. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey representation of a particular vessel.

Other Yachts for Sale